AmeriGlass Industries

Bonita Springs & Naples, FL

Impact Windows and Doors in Bonita Springs, Florida

Bonita Springs Impact Windows -- Installed by the Company Based Right Here

Bonita Springs straddles the Collier-Lee County line, and the entire area falls within the Wind-Borne Debris Region under the Florida Building Code. Design wind speeds here are 150 to 160 mph, and every new or replacement window and door opening must meet impact-rated standards.

AmeriGlass Industries is headquartered right here in Bonita Springs at 25221 Bernwood Dr, Unit 1, Bonita Springs, FL 34135. This is not a satellite office -- it is where our crews start their day, where we store materials, and where we manage every project. When you hire AmeriGlass for your Bonita Springs impact window installation, you are hiring your neighbor.

Florida Certified Specialty Contractor License: SCC131152123

50+ Years

Experience

Licensed

& Insured

Fast Service

Quick Install

Need immediate assistance?

Call Us Now

Available Mon-Fri, 8AM - 5PM
Email

AmeriglassSWFl@gmail.com

Location

2977 Goodlette Frank Rd N Naples Fl 34103

5-star customer rating — AmeriGlass Industries glass company Naples FL
Rated 5.0 by 200+ customers

Why Bonita Springs Homeowners Are Choosing Impact Windows

Bonita Springs sits between Naples and Fort Myers along the Gulf coast. The area took significant damage during Hurricane Ian in 2022, and homeowners across the community have been upgrading their window and door protection since.

The reasons go beyond code compliance:

Hurricane Protection That Is Always Ready.

Shutters work, but they have to be installed before every storm. For seasonal residents who split time between Bonita Springs and a northern home, that means either flying back to board up or paying someone to do it. Impact windows are in place year-round -- no preparation needed when a storm is approaching.

Noise and Comfort.

Bonita Springs has grown rapidly, and traffic along US-41 (Tamiami Trail), Bonita Beach Road, and Imperial Parkway has increased with it. Impact windows with insulated laminated glass reduce road noise significantly. Combined with Low-E coatings, they also reduce cooling costs -- no small thing when your AC runs eight months a year.

Insurance Savings.

Florida insurance carriers offer wind mitigation discounts when all building openings are protected with impact-rated products. For Bonita Springs homeowners, where insurance premiums have risen sharply since Hurricane Ian, these discounts can offset a meaningful portion of the window investment over time.

Home Value.

Impact windows are one of the top features SWFL buyers search for. A home with impact windows commands a higher price and sells faster than a comparable home with shutters or no protection.

Bonita Springs Neighborhoods Where We Install Impact Windows

Our office is in Bonita Springs, so we know these neighborhoods well:

Coastal Bonita Springs:

Bonita Beach and Little Hickory Island

Barefoot Beach (gated, unincorporated Collier County)

Bay Harbor

Paradise Village

Spring Creek

Central Bonita Springs:

Imperial Shores

Bermuda Park

Spanish Wells

Pelican Landing

The Brooks

Vasari Country Club

East Bonita Springs and Bonita Springs (Lee County side):

Imperial Golf Estates

Worthington Country Club

Highland Woods

Cedar Creek

Bernwood Park area (near our office)

Nearby Unincorporated Areas We Also Serve:

Estero (Village of Estero, Coconut Point area)

San Carlos Park

Three Oaks area

Bonita Springs properties may fall under either the City of Bonita Springs, Lee County, or Collier County jurisdiction depending on the address. We determine the correct permitting authority for your property and pull the right permit.

Impact Window and Door Products for Bonita Springs Homes

Bonita Springs has everything from older waterfront cottages along the Imperial River to new custom homes in gated golf communities. We carry impact products to fit every type of home.

Windows:

Doors:

Glass Upgrades:

Bonita Springs Impact Window Permits and Building Code

Bonita Springs straddles the Collier-Lee County line, so the permitting authority depends on your property's location:

Within City of Bonita Springs limits (Lee County side):

Permit through the City of Bonita Springs

Unincorporated Lee County (east of the city):

Permit through Lee County

Barefoot Beach and other properties in Collier County:

Permit through Collier County

AmeriGlass determines the correct jurisdiction for your property, pulls the permit, and coordinates the final inspection. You do not need to visit any government office.

The reasons go beyond code compliance:

Wind Zone:

Wind-Borne Debris Region, 150-160 mph design wind speed

Code:

Florida Building Code, 7th Edition (2020)

Product Approval:

All products must carry a valid Florida Product Approval (FL) number or Miami-Dade County NOA

25% Rule:

Replacing fewer than 25% of window openings allows non-impact windows to remain. Beyond 25%, all openings must be impact-rated.

Inspection:

Required after installation. We handle scheduling and ensure the job passes.

Impact Window Questions from Bonita Springs Homeowners

I am a seasonal resident and only in Bonita Springs from November to April. Can you do the installation while I am away?

Yes. Many of our Bonita Springs clients are seasonal residents. We can coordinate key access, keep you updated with photos and progress reports, and have the project completed before you arrive for the season. Our office is local, so we are on-site to oversee every phase.

Barefoot Beach is in unincorporated Collier County, even though Bonita Springs is primarily in Lee County. We pull your permit through Collier County and coordinate the inspection accordingly.

No. You can replace a single door or window without triggering a full-house requirement. Under the 25% rule, as long as you are replacing fewer than 25% of your total window and door openings, the rest can stay as-is. The new door must be impact-rated, but your existing windows do not have to be upgraded at the same time.

Contact us for a free estimate as early as possible. Once you approve the quote, manufacturing lead times typically range from 4 to 8 weeks depending on the product line. We recommend starting the process well before hurricane season (June 1) to avoid the seasonal rush.

Yes. Both aluminum and vinyl frames come in a range of standard colors, and custom color matching is available for aluminum frames. We bring color samples to your in-home estimate so you can see the options against your home's exterior.

Share with your friends and family!

Facebook
LinkedIn
WhatsApp
Email
Twitter